Retaining Wall Contractor in Miri, Sarawak
Anchored MSE wall, RE wall, RS wall, and RC retaining wall contractor for Miri and the wider Sarawak state. JKR / PLUS / KTMB / LLM specified. 500+ projects since 1999, AnchorSOL Wall Sdn. Bhd.
Building walls in Miri
Miri sits on the north Sarawak coastal belt, with alluvial deposits inland and the Miri Hill (Bukit Tenaga) tower-karst formation marking the city centre. South of Miri, the Niah and Lambir areas climb into sedimentary uplands. Coastal sections face peaty marine clays; inland sections face landslip-prone weathered sediments on steep grades.
Miri is the oil and gas capital of Sarawak and Malaysia's second city in East Malaysia. Petronas Malaysian LNG, Shell, and various upstream operators anchor the economy. The Miri Crude Oil Terminal and Bintulu LNG (south) drive heavy goods movement on the Pan Borneo corridor. Tourism: Niah Caves, Lambir Hills, Gunung Mulu National Park (via Miri airport).
Local authority: MBMP (Majlis Bandaraya Miri). Nearby landmarks the local engineering community uses for site reference: Bukit Tenaga (Canada Hill), Miri Crude Oil Terminal, Niah National Park (south), Lambir Hills National Park, Marina Phase 2, Tudan, Permyjaya, Bekenu (suburb), Miri Airport, Gunung Mulu National Park (inland access via Miri).
What we build in Miri
Highway-embankment walls on the Pan Borneo Sarawak northern alignment. Oil-and-gas plant-side retention with marine-grade durability for the Miri Crude Oil Terminal and ancillary works. Coastal-edge retention along the South China Sea shoreline. Tourism-corridor walls towards Niah and Lambir.
The wall systems available across these applications:
- Anchored MSE wall, the AnchorSOL system: precast concrete facing panels, hot-dip galvanised tendons, discrete deadman block anchors, crusher-run backfill. Most economical above 5 m wall height. More on MSE wall fundamentals →
- Reinforced Earth (RE) wall, the steel-strip variant: cruciform precast facing, ribbed steel strip reinforcement, granular sand backfill. Henri Vidal's original 1963 system. More on RE walls →
- Reinforced Soil (RS) wall, the geosynthetic variant: HDPE geogrid or PET woven grid reinforcement, segmental block or precast facing, crusher-run backfill. Faster to install on tight footprints. More on RS walls →
- RC retaining wall, conventional reinforced-concrete cantilever or counterfort: for walls under 5 m, or where space, programme, or aesthetic favours RC over MSE. More on RC retaining walls →
AnchorSOL projects in or near Miri
Pan Borneo Highway Sarawak embankment walls on the northern packages serving Miri to the Bruneian border. JKR Sarawak district roadworks. Various oil-and-gas plant-side and port-side platform walls.
Selected references span federal-road (JKR), expressway concession (PLUS, LLM, LATAR, ELITE, SUKE, DUKE, EKVE depending on corridor), rail-corridor (KTMB), and major-developer projects across Sarawak. Full project portfolio →
Building a wall in Miri? Talk to us.
500+ named projects since 1999. Anchored MSE, RE, RS, RC retaining walls. Specified by JKR, PLUS, KTMB, LLM.
FAQ - retaining wall contractor in Miri
Do you build retaining walls in Miri?
Yes. AnchorSOL Wall Sdn. Bhd. delivers anchored MSE walls, RE walls, RS walls, and RC retaining walls in Miri and the wider Sarawak state. Local authority is MBMP (Majlis Bandaraya Miri). Our delivery is via the same precast manufacturing in Bukit Jelutong, Shah Alam, with project-managed haulage to Miri.
What wall type is best for Miri ground conditions?
Selection depends on the specific site. Miri sits on the north Sarawak coastal belt, with alluvial deposits inland and the Miri Hill (Bukit Tenaga) tower-karst formation marking the city centre. South of Miri, the Niah and Lambir areas climb into sedimentary uplands. Coastal sections face peaty marine clays; inland sections face landslip-prone weathered sediments on steep grades. Wall-system selection follows: hillside cuts favour anchored MSE; soft-foundation sites need ground improvement before MSE; urban-infill plots may need RC counterfort where space is constrained.
Which Miri agencies have you worked with?
We deliver to federal agencies (JKR, PLUS, LLM, KTMB) operating in Sarawak, plus the local authority MBMP (Majlis Bandaraya Miri) where municipal walls are specified. Project list available on request.
How does delivery to Miri work?
Precast facing panels are manufactured at our Bukit Jelutong (Shah Alam) facility, then hauled to Miri on flat-bed trucks. Tendon and anchor block production is co-located. A 3 to 4 person erection crew mobilises with the panels and completes 30 to 80 m² of wall per day on site.